3/4 in. threaded

3/4 in. threaded

The 3/4 in. threaded mount is used on threaded pipes when the:

  • pipe length is 7/16 - 1/2 in. (measured from the wall), and
  • pipe threads or adapter threads are 3/4 in. NPT
NOTE:

A Trim Plate (escutcheon plate) is available for use with the ADTS' tub spout. It has a depth of 3/8 in. and can be used to fill a gap between the wall and the back of the tub spout. It can also be used to cosmetically cover larger access openings to the tub spout's water supply. If using the Trim Plate, be sure to add its depth (3/8 in.) to the pipe length measurements provided above.



      Also in ADTS Mounting Options

      Configurations
      Configurations

      ADTS part numbers end in SB or CT. 

      • SB: all mounts included
      • CT: mounts ordered separately
      • Ind. mounts sold in 10-packs
            Slip-Fit Mount
            Slip-Fit Mount

            Use on 1/2 in. non-threaded pipes:

            • pipe length 1 1/4 - 1 3/4 in.
            • copper, galvanized or CPVC
            • PEX or CPVC with copper stub
                1/2 in. threaded
                1/2 in. threaded

                Use on NPT threaded pipes:

                • pipe length 7/16 -1/2 in.
                • works with 1/2 in. galvanized
                • works with 1/2 in. NPT adapters

                    Net Orders Checkout

                    Item Price Qty Total
                    Subtotal $0.00
                    Shipping
                    Total

                    Shipping Address

                    Shipping Methods